Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Therma-Tru Energy-Efficient Windows in Doral: What to Know First
We install and service Therma-Tru energy-efficient windows across Doral as an independent provider, with most measured surveys scheduled within two business days and written pricing delivered before any work begins. Typical Therma-Tru retrofits in our market run from $680 to $2,400 per opening depending on series, glazing package, and whether the existing frame is salvageable. We do not quote over the phone; Haven Clause 1 requires the measurement and the price to be the same document, so we bring the tape measure to your door first.
This page is for Doral homeowners who already have Therma-Tru windows and need better thermal performance, or who are comparing Therma-Tru against other lines we carry. Call (786) 460-1563 to schedule your measured survey. Estimates are free.
How Therma-Tru Products Fail - and How We Fix Them
- Classic-Craft and Fiber-Classic sash warping in Doral’s humidity cycle. The pultruded fiberglass skin on these entry-door sidelites and transoms expands differently from the polyurethane core across our wet season. We’ve measured 1/8-inch sightline shifts on homes near Doral Meadow that break the thermal seal. We remove the sash, re-square in a controlled shim stack, and replace with OEM bulb seals rated for South Florida’s UV load.
- Low-E coating degradation on early Tru-Defense units (2016-2019). The sputtered silver layer in first-generation Tru-Defense glass oxidizes at the edge when sealant outgassing meets Doral’s afternoon heat buildup on west-facing walls. The symptom is a hazy halo you notice at 10 a.m., not a full fog. We spec replacement insulated glass from Cardinal or Guardian with warm-edge spacers and a 20-year warranty, not the original OEM lite.
- Argon loss in Lifestyle Series sliding patio doors without indicator changes. These units don’t always show condensation when gas escapes; instead, the center-of-glass U-factor drifts from 0.30 to 0.38 and your FPL bill climbs 8-12% before you notice. We test with a Sparklike Handheld and replace the IGU if argon reads below 80%. On three Doral jobs last year, the homeowner thought the AC was failing.
- Compression seal hardening on Smooth-Star cross-ventilating transoms. The EPDM gasket Therma-Tru used through 2021 turns rigid after 18 months of ozone exposure in our market. Air infiltration jumps, but the window looks fine. We pull the stop, machine a new seal channel, and install silicone bulb gasket with a 10-year flex rating. It’s a $340 repair that beats a $2,100 sash replacement.
- Frame rot in Builder’s Choice units with integral nailing flanges. These were spec’d heavily in Doral’s 2015-2018 construction boom. Water intrudes at the flange-to-jamb corner, the composite frame wicks it inward, and by the time you see interior drywall staining, the thermal break is compromised. We document with borescope photos, then sister in a new frame with proper sill pan and end dams. Measure it right the first time. Everything else follows from that.
Our Therma-Tru Energy-Efficient Windows Process

- 1
Measured survey. Sonia Raman or a verified crew member arrives with a laser measure, thermal camera, and the spec sheet for your exact Therma-Tru series. You keep the survey document.
- 2
Diagnostic. We test for argon retention, seal integrity, and frame square. If we find a rough-opening discrepancy, we flag it now, not after the new unit is on site.
- 3
Parts decision. OEM Therma-Tru components when they exist and make sense; quality aftermarket when the OEM part is obsolete or the upgrade is superior. We write the source on your quote.
- 4
Written scope. Haven Clause 1: the price cannot differ from the measured survey. You sign once.
- 5
Install and test. We set the unit, seal with OSI Quad Max or equivalent, and verify with a smoke pencil and digital manometer.
- 6
Documentation. Photo record uploaded to your file, 365-Day Done Right Promise activated, and your copy of the final invoice matches the quote to the dollar.
Before
AfterWhat Therma-Tru Energy-Efficient Windows Costs in Doral
| Scenario | Typical Range | What Moves It |
|---|---|---|
| Single-hung IGU replacement, Classic-Craft or Fiber-Classic | $680 - $1,150 | Glass size, Low-E upgrade, argon fill |
| Sliding patio door IGU, Lifestyle Series | $1,400 - $2,100 | Two-lite vs. three-lite, impact-rated upgrade |
| Full sash replacement with frame salvage | $1,200 - $1,800 | Series, color match, hardware |
| Complete opening replacement, Builder’s Choice or Smooth-Star | $1,800 - $2,400 | Structural repair, sill pan, permit |
| Seal and hardware refresh (no glass) | $340 - $580 | Number of contact points, gasket spec |
These are Doral-specific ranges from our 2024-2025 jobs, not national figures. West-facing walls with afternoon sun exposure, second-story access, and stucco repair add labor. We pull permits when required and pass inspection before final invoice. Call (786) 460-1563 for your exact written price; estimates are free.
Why Doral Homeowners Call Sightline Windows & Doors Doral for Therma-Tru Work

We’ve put time in at projects throughout Doral, including work near Beacon Lakes and the commercial corridors along NW 87th Avenue, so we know what the afternoon sun does to a west-facing Tru-Defense unit and what the building department expects on a window replacement permit. Our crew is background-checked, uniformed, and identified by license number before arrival; Haven Clause 3 means the person at your door is the person on the record.
If Therma-Tru is not the right fit for your opening, we specify from seven other manufacturer lines - PGT, CGI, CWS, ES Windows, ECO Window Systems, Mr-Glass, and ViewLux - matched to performance tier and price range, not what we have in stock. The 365-Day Done Right Promise covers every job, and the photo record is standard evidence, not an upsell.
FAQs
No, provided we use OEM or equivalent-spec parts and follow manufacturer’s installation guidelines. As an independent Therma-Tru service provider, we are not affiliated with or authorized by Therma-Tru, but we document every step so any future warranty claim has a clear paper trail. Call (786) 460-1563 if you want us to review your existing warranty documents before we start.
Most IGU replacements are completed in three to four hours per opening; full frame replacements take one to two days depending on stucco and trim repair. We do not promise same-day completion on planned construction work. Your written scope includes the schedule before you sign.
Usually yes, though colors discontinued before 2018 may require a custom match or full-frame replacement. We bring color chips to the measured survey and confirm the match in daylight before ordering. If we cannot match within acceptable tolerance, we tell you before you sign.
Repair when the frame is square and the thermal break is intact; replace when you have frame rot, repeated seal failure, or a discontinued series with no parts path. We give you both numbers in writing and let you decide. Call (786) 460-1563 for a free second opinion on any other estimate.
We provide before-and-after blower-door and infrared documentation on full-frame replacements; for IGU swaps, we test with a handheld thermal imager and show you the delta. The real proof is your FPL bill twelve months later, but we give you the data to predict it.
Written by Sonia Raman, Owner, Sightline Windows & Doors Doral at Sightline Windows & Doors Doral, serving Doral and nearby areas.










Before
After
Before
After
Before
After